92 -.We confirm the level of the convector.
Decreasing the value of the convector will increase
the air temperature.
93 - We leave the air adjustment of the convector.
The adjusted value is automatically provided
in the other levels.
94 -We select several uses programming.
95
- We enter programming various uses.
96 - We select hardware tests. Check if the motors
are connected before each ignition.
97 -We enable the hardware test.
In the event that
the electrical network is unstable, this test
should be disabled.
98 - We confirm hardware test enablement.
99 - We select keyboard sound.
100 - We enable keyboard sound. There will be a
short beep every time we press a key. You will also
hear beeping sequences when the stove is turned on
and off.
101 - We confirm keyboard sound.
We confirm keyboard sound.
We enter operating mode.
104 - This option is only used in boilers with sanitary
water accumulator. We left several uses
programming.
105 - We select programming by standby
of security.
14
