AR 600A400, Руководство по эксплуатации и обслуживанию

Страница: 44 / 58

Model 600A400
22 Rev A
2.4.6.17 System Serial Number
Query to get the serial number of the system.
Syntax: SN?
Parameters: None
Query only (always requires a ? character)
Response Format: x<LF>
Where:
x = serial number (6 to 8 characters)
Example: To get the serial number, send the following command:
SN?<LF>
Response: 1234567<LF>
2.4.6.18 AC Power-On Defaults
Default settings that are applied at AC mains power-on can be changed by adding the following prefix to
select commands.
Syntax: DEFAULT:
Compatible commands:
Level Adjust
LEVEL:GAIN
LEVEL:DET (Not available on all models)
LEVEL:THR (Not available on all models)
LEVEL:RESP (Not available on all models)
Mode Select
MODE:MANUAL (Not available on all models)
MODE:PULSE (Not available on all models)
MODE:ALC<space>INT (Not available on all models)
MODE:ALC<space>EXT (Not available on all models)
NOTES:
1.
Use the command
DEFAULT:FACTORY
to reset all applicable settings back to their factory defaults.
2. All applicable defaults can be queried, except DEFAULT:FACTORY , by adding a ? character in place
of the setting parameter.
3. If the ALC Lockout Feature (not available on all models) is engaged, the default ALC values set with this
command will not be used.
Example 1: To set the default RF Gain to 75%, send the following command:
DEFAULT:LEVEL:GAIN75<LF>