AR 100A400AM20, Руководство по эксплуатации и обслуживанию

Страница: 18 / 46

Model 100A400AM20
2 Rev A
1.4 INSTALLATION
Before proceeding, thoroughly inspect the amplifier for signs of physical damage that may have been
incurred during shipment and completely read the following installation and operating instructions, paying
special attention to all CAUTION notes.
1.4.1 Location
Select an operating location that will permit air to circulate freely around the amplifier’s cabinet. The
Model 100A400AM20 utilizes air cooling and should be located where the normal flow of air into or exiting
from the unit will not be restricted, diverted, or re-circulated through the unit itself; in particular, the flow of
warm air exiting the rear of the amplifier should not be impeded.
Do not position the unit next to a wall or other equipment that would restrict the flow of air into the bottom
of the unit or out of the rear of the unit.
1.4.2 Power
The Model 100A400AM20 is designed to operate using AC primary power of 100–240 Volts Alternating
Current (VAC), 50–60 Hz single phase, 500 watts maximum.
CAUTION:
Dangerous voltages are present in the Model 100A400AM20 whenever the
unit is plugged into an AC outlet. Always disconnect the unit from the
main power line when servicing it.