AR 1000T2G8B, Руководство по эксплуатации и обслуживанию

Страница: 34 / 72

Model 1000T2G8B
20 Rev -
Table 3-4. Catalog of Status Codes
(The RDSTAT command causes the TWTA to return a string in the form STATUS=[ code ], where [ code ] is
an ASCII number whose meaning is given below)
Status Code Meaning
0 No command was given or last command was successful.
1 Last command successful.
2 Last command is in process.
3 Last command failed to complete. Time-out.
10 Last command failed. Invalid command.
11 Last command failed. Data was unparseable.
20 Last set command failed. Data was beyond high limit.
21 Last set command failed. Data was beyond low limit.
22 Last set command failed. Data was out of range
23 Last set command failed. Data was wrong polarity
50 Last command failed. Local system does not have remote enabled.
60 Command not allowed
901 Assert error: invalid table argument *
902 Assert error: invalid table argument *
* Please call a service representative if you observe this error.
Table 3-5. Catalog of Fault Codes
(The RDFLT command causes the TWTA to return a string in the form flt=[ code ], where [ code ] is an ASCII
number whose meaning is given below)
Fault Code Meaning Fault Code Meaning
0 No fault 72 FIL NOT READY2
40 FIL NOT READY1 73 LOW LINE2
41 LOW LINE1 74 CATH O/VOLTAGE2
42 CATH O/VOLTAGE1 75 BODY O/CURRENT2
43 BODY O/CURRENT1 76 CATH U/VOLTAGE2
44 CATH U/VOLTAGE1 77 ID_BOARD2
47 COLL U/VOLTAGE1 79 COLL U/VOLTAGE2
48 INVERTER FAULT1 80 INVERTER FAULT2
49 INTERLK OPEN1 81 INTERLK OPEN2
50 TUBE ARC1 82 TUBE ARC2
51 TWT OVER TEMP1(h) 83 TWT OVER TEMP2(h)
52 CABINET O/TEMP1(h) 84 CABINET O/TEMP2(h)
54 EXTERNAL INHIBIT1 86 EXTERNAL INHIBIT2
55 OVER REV POWER1 87 OVER REV POWER2
58 Panel Open1 90 Panel Open2
59 latched fault1 91 latched fault2