AR 1000T2G8B, Руководство по эксплуатации и обслуживанию

Страница: 16 / 72

POWER (fundamental), CW, @ OUTPUT
CONNECTOR:
Nominal: 1100 watts
Minimum: 900 watts minimum, 2.5–2.7GHz;
1000 watts minimum 2.7–7.5GHz.
Linear @ 1 dB Compression: 250 watts minimum
FLATNESS: ±8 dB maximum, equalized for ±3 dB
maximum at rated power
FREQUENCY RESPONSE: 2.5–7.5 GHz instantaneous-
ly
INPUT FOR RATED OUTPUT: 1.0 milliwatt maximum
GAIN (at maximum setting): 60 dB minimum
GAIN ADJUSTMENT (continuous range): 35 dB mini-
mum
INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.5:1 typical
MISMATCH TOLERANCE: Output power foldback
protection at reflected power exceeding 200 watts. Will
operate without damage or oscillation with any magni-
tude and phase of source and load impedance. May
oscillate with unshielded open due to coupling to in-
put. Should not be tested with connector off.
MODULATION CAPABILITY: Will faithfully reproduce
AM, FM, or pulse modulation appearing on the input
signal. AM peak envelope power limited to specified
power.
NOISE POWER DENSITY: Minus 80 dBm/Hz
(maximum); Minus 90 dBm/Hz (typical)
HARMONIC DISTORTION: Minus 15 dBc maximum,
Minus 17 dBc typical
PRIMARY POWER: See Model Configuration
CONNECTORS:
RF input:
Type N female
RF output: See Model Configuration
RF output sample ports (forward and reflected):
Type N female
GPIB: IEEE-488 female, rear
Interlock: DB-15 female, rear
COOLING: Forced air (self contained fans), air entry
and exit in rear.
WEIGHT (approximate): 295 kg (650 lb)
SIZE (WxHxD): 56 x 160 x 82.3 cm (22.1 x 63 x 32.4
in)
EXPORT CLASSIFICATION: EAR99
Page 2
Specifications
1000T2G8B

M1, M2, M3, M7–
M11

1000 Watts CW

2.5GHz–7.5GHz