AR Blue Clean AR527, Руководство пользователя

Страница: 9 / 16

• Release safety lock on gun while aiming gun away from yourself and others by
pressing the safety button from left to right, then pull or squeeze the trigger. Fig 15
pressing the saf pressing the saf
When using the adjustable spray lance, the spray pattern and intensity can be con-
trolled according to power of water needed for each task. Twist the spray nozzle at
the far end of the lance. Fig 18. Make sure not to aim the gun at bare feet, fingers,
hands or any other part of your body since it has enough power to blast away skin
or put out an eye. It also has the power to damage paint, glass, or other materials
if the gun is too close to the surface or it the spray is concentrated into it’s smallest
stream.
• When using the Turbo lance make sure the turbo nozzle is screwed on tight to the
lance each time you use it. The Turbo lance is designed for high impact cleaning.
Only use on hard surfaces such as driveways, cement surfaces, patio bricks, etc. A
test strip should be done prior to avoid chance of damaging the surface.
• A clogged or partially clogged nozzle can cause significant reduction of water
pressure coming out of the nozzle and/or cause the unit to pulsate while spraying.
• Turn off the unit.
• Turn off the water supply to the unit.
• Relieve any pressure trapped in the hose by squeezing the trigger 2-3 times.
• Remove lance (turbo nozzle or adjustable spray nozzle) from gun.
• Rotate nozzle on the adjustable lance to the narrow stream setting which opens up
the fan blades Fig 19.
• Using the tip cleaner provided(or an unfolded paper clip), insert the wire into the
nozzle hole and move back and forth until debris is dislodged Fig 20. Back flush
water through the nozzle using garden hose and highest pressure available (either
standard water nozzle or use your thumb over the nozzle to create water pressure
for back flush).
HOW TO’s AND OPERATING TIPS
Off
On
Fig.16 Fig.17
Gun
Safety
utton
Trigger
Fig.18 Fig.19
Fig.20 Fig.20