Aquos zero2, Руководство пользователя, Страница: 214 / 220

212
Care & Maintenance
・Proper care of Card Tray gasket is crucial for continued
handset water and dust resistance. Observe the following:
・Do not remove or damage gasket. Keep it clean.
・If Card Tray is damaged or deformed, contact a SoftBank
Shop.
・Do not insert a sharp object into Card Tray gap or External
Connection Jack.
・To maintain water and dust resistance, it is recommended to
replace Card Tray every 2 years regardless of its condition.
Customer-requested Card Tray replacement incurs fees and
requires handset submission. For details, contact a SoftBank
Shop or
Customer Service .
Washing Handset
Wipe off dirt, sand, beverage, etc., gently with a cloth. Then
hold handset approximately 10 cm below faucet or shower
head and wash with low-pressure tap water (6 liters/min.
or lower) at room temperature (5
o
C - 35
o
C). Wash with your
hands, holding Card Tray so it makes no gap with handset;
do not use a brush or sponge. Dry handset before use; after
drying it well, power on.
・Before washing handset, make sure that Card Tray is closed
firmly leaving no gap between handset and Card Tray.
・Do not use a washing machine or ultrasonic cleaner.
・External Connection Jack tend to accumulate dust, sand,
etc.; rinse and dry them completely before use. Any residue
may cause malfunction, burns or fire.
・Do not put a cotton swab, cloth, etc. into External
Connection Jack; may affect water resistance, causing
malfunction.
Drying Handset
After exposing handset to water, be sure to dry Earpiece/
Speaker, Volume Keys, Power Key, Speaker, External
Connection Jack, Mic/Recorder Mic, Card Tray, and Mic.
Wipe handset surface with dry cloth
Holding handset firmly by its sides, shake it about 20 times
・When shaking handset, hold it firmly so as not to drop it.
・Shake with circled ○ portion downward to drain water from
all holes and gaps.
Pat against dry cloth to remove moisture from openings and
grooves
・Water may be trapped in openings; pat against a dry cloth
to remove it.
Leave handset on dry cloth for approximately 2 - 3 hours at
room temperature
Handset is dried.
Cautions
When Removing Moisture
Do not put a cotton swab, cloth, etc. into openings; may
affect water and dust resistance.