67
Handset Settings
SH-07E_E_07.fm
[67/69]
You can set contacts in the phonebook not to be displayed in
the phonebook, outgoing/incoming call history, etc. by setting
the secrecy setting for the contacts.
When you temporarily disable the secret mode, both normal
contacts and contacts for which the secrecy setting is set are
displayed.
If the display is turned off while the secret mode is temporarily
disabled, the secret mode is activated.
1
In the home screen, [
R
]
/
[Settings]
/
[Lock &
Security]
/
[Secrecy settings]
2
Enter the passcode
/
[OK]
:
The secret mode is temporarily disabled.
3
Select an item
Set contact secrecy
: Set the secrecy setting for contacts in
the phonebook.
Disable secret mode temporarily
: Make settings for
temporary cancellation of the secret mode.
Guide
: Display how to temporarily disable the secret mode
and explanation for contacts in the phonebook for which the
secrecy setting is set.
Disabling the secret mode temporarily
1
Drag the status bar down
2
Touch and hold [
j
]
3
Enter the passcode
/
[OK]
Some functions for convenient use of the handset require
security codes. In addition to security code used for various
handset operations, use security codes such as the network
security code when using network services. Use security
codes with various functions to fully utilize the handset.
Entered security code for various functions and PIN code are
marked with [
・
].
Precautions about various security codes
Do not use easily estimated numbers for security codes to be set
such as “birthday”, “part of a phone number”, “address or room
number”, “1111” or “1234”. Keep a separate memo of security
codes.
Keep security codes private. If the security codes are found and
improperly used by others, DOCOMO shall not be liable for any
loss of the users.
If you forget your security codes, you are required to bring your
identification (a driver’s license etc.), your handset and your
docomo mini UIM card to a docomo Shop.
For details, contact the number listed in “General Inquiries” on
the last page.
PUK (PIN Unlock Key) is described in the agreement form
(customer copy) you received at the time of subscription at a
docomo Shop. If you made a subscription at other than a
docomo Shop, bring your identification (a driver’s license etc.)
and your docomo mini UIM card to a docomo Shop or contact the
number listed in “General Inquiries” on the last page.
If you set any restrictions, you need to enter the security key to
temporarily disable them. [Passcode] ([0000]) is set as a security
key by default but you can change it (
n
P. 67).
If you enter the wrong security key five times continuously, you
cannot enter it for 30 seconds.
Network security code is a four-digit code required for confirming
the subscriber’s identity when an order is received at a docomo
Shop, docomo Information Center or “
お客様サポート
” (Support),
used for accessing various network services, etc. You can set any
code at the time of subscription but you can change the code.
As for those with “docomo ID/password” of the general support
website “My docomo” designed for PC (in Japanese only), the
registration procedure for a new network security code is available
from PC. Alternatively, in the home screen, [
R
]
/
[dmenu]
/
[
お客様サポート
] (Support)
/
[
各種お申込・お手続き
] (Various
Applications/Procedures) to change your network security code.
Refer to the page second from the last of this manual for details
on “My docomo” or “
お客様サポート
” (Support).
A docomo mini UIM card has a security code called PIN code. This
security code is set to [0000] by default but you can change the
code (
n
P. 68).
The PIN code is a four- to eight-digit security code that is entered
when a docomo mini UIM card is inserted or when the handset is
turned on to prevent unauthorized use of the docomo mini UIM card
by a third party. Making/Receiving a call and the handset operation
are enabled by entering PIN code.
Use the previously set PIN code when inserting a docomo mini
UIM card that has been used in another handset. It is [0000] if
the setting has not been changed.
If you enter the wrong PIN code three times continuously, it is
locked and the docomo mini UIM card becomes unavailable. In
this case, unlock with “PUK” (PIN Unlock Key).
PUK (PIN Unlock Key) is an eight-digit number used to disable the
PIN code lock. You cannot change the code.
If you enter the wrong code ten times continuously, the docomo
mini UIM card is completely locked. In this case, contact a
docomo Shop.
1
In the home screen, [
R
]
/
[Settings]
/
[Lock &
Security]
/
[Application lock]
2
Enter the passcode
/
[OK]
/
[Change security
key]
3
Select an item
Finger list
: Set a pattern which forms by linking four or more
dots.
Passcode
: Set four- to sixteen-digit number.
Password
: Set four to sixteen alphanumerics or half-width
symbols including at least one alphabet.
･
Some half-width symbols are not available.
[Restrict calls]
You can call to the emergency number (110, 119 or 118) even
when you set Restrict calls.
Secrecy settings
Security codes used on the handset
Security key (security code for various functions)
Network security code
PIN code
PUK (PIN Unlock Key)
Changing security key
SH-07E_E.book 67 ページ ２０１３年６月２５日 火曜日 午後２時２１分