7
ACCESSORIES
Remote Display
An optional remote display is available. The remote display provides all of the indicator lights and an
output level selection button at a convenient location. It is connected to the ComAir 20T by a cable with
RJ45 connectors (not included-same as a computer network cable). Plug one end of the cable into the
end of the remote display (see figure on next page) and the other end into the connector labeled
“Remote” located on the PC Board mounted in the cover. The cover must be removed to access the PC
Board. See the figure on page 9 for the location of the “Remote” connector on the PC Board. The cable
can be routed though the unused strain relief mounted on the ComAir 20T chassis.
Output Level Button
Remote
connection
