9. ERROR MESSAGES AND SOLUTIONS
Message error
probable Causes
Solutions
FC
►
The cartridge has exceeded
168 hours of use
►
Change the filter and press the "FILTER"
button to reactivate the system, the FC error
message disappears
SL
►
The water temperature
inside the spa is below 0 ° C
►
Wait for the temperatures to rise or add
water hot water in the spa
►
If the water is above 0 ° C
while the panel still displays
SL, it means that it has tripped
due to an internal problem
►
Check if the control panel control is properly
connected to the socket connecting it to the
motor.
Check if there is water inside the control panel,
if yes unplug it, and remove it, then dry and wait
4 hours before reinstalling it.
If it still does not work: change it
SH
►
The water temperature
inside the spa is above 60 ° C
►
Lower the water temperature
►
If the water drops below 60
° C while the panel still
displays SH, this means that it
has locked itself out due to an
internal problem
►
Check whether the control panel is properly
connected to the socket connecting it to the
motor
Check whether there is water inside the control
panel. If so, unplug it, and remove it, then dry
and wait 4 hours before reinstalling it
If it still does not work: change it
Check if the filtration is working normally
Check if the water outlet is blocked
- If the The water flows slowly and the outlet is
clogged, clean the outlet
- Check if the filter is too dirty, clean the filter or
replace it with a new filter
- If the pump is not working properly, clean the
inlet water
24
