Aquavolta Monmi-Tec HIM 3.0 ppm, Руководство пользователя

Страница: 17 / 29

16
2 3
1. Open the cold water tap to release the
pressure. With the cold water running, turn
the cold water angle valve clockwise until no
more water comes out at the top.
2. With the water supply turned off, loosen the
supply line to the cold water tap of your sink
at the 3/8" angle valve.
3. Fit the angle shut-off valve between the
angle valve and the supply pipe of the
cold water tap.
4. Then check the tightness by turning the
lever crosswise and opening the knob of
the angle valve with the tap closed.
5. Insert a suitably cut end of the white ¼"
hose firmly into the ring coupling of the
angle shut-off valve. Make sure that the
grey end of the hose is not
Lever on the angle shut-off valve in the
position
is "closed" (4).
6. Depending on the planned position of the
water ioniser, you will now need to drill a hole
for the ¼" feed hose in the sink or kitchen
worktop. The
Hose diameter is mm.6,3
5
Video Crash Course Installation:
https://www.youtube.com/watch?v=nsB66ZgZ6nM
1
Mounting B: On the angle valve with hole (plumber)
6
3
1
2
4