Power Supply & Connecting Units
The sentia™dose Primary Control Unit includes a Power Adaptor and Plugs Set. The Plugs Set includes plugs
matching electrical outlets for North American, EU, UK and Australia/New Zealand locales or setups. To prepare
the Power Adapter for use, slide the appropriate Plug onto the Plug Adaptor firmly - the Plug should lock into place
securely. The Power Adapter supplies power to the the Primary Control Unit and any Secondary Units attached to
the Primary Control Unit.
Always make certain the Power Adapter is unplugged before connecting or disconnecting any Primary
Control Unit or Secondary Units in sequence.
To connect any unit in sequence simply remove the corresponding side plates of the units being connected (Figure
1.A) and slide the unit being connected to the right down onto the unit on the left (Figure 1.B). Replace all side
covers to any exposed sides once connections are complete.
Primary Control Units and Secondary Units can be connnected in any sequence or order. The connected units
sequence will always appear in the app list from left to right in a top-to-bottom arrangement with the left unit being
at the top of the list.
Once all units being used are connected in sequence and side covers are in place, the Power Adpator can be
plugged into any unit in the sequence. All units should have lights illuminate just above the Pump Head(s). A white
colored circle should be lit to the right above the Pump Head(s). A white WiFi emblem should show to the left above
the Pump Head on Primary Control Units. A white Link emblem should blink to the left on any Secondary Units - the
light(s) will blink in succession for any sequence of Secondary Units.
Figure 1.A
Figure 1.B
Содержание sentia dose
Страница 2: ......
