background image

If the supplement should be dosed in a specific time of day or night, enter the time frame for the dosing to occur. If 
the supplement should be dosed in a specific day interval, enter the day interval desired for the dosing to occur. If 
the supplement should be dosed in on specific days of the week, enter the days of the week desired for the dosing 
to occur.

For Any Supplements:

Once a dosing schedule of any type is saved, returning to the schedule from the dashboard allows the user two 
more options for adjusting the dosing regimen; “Quick Adjust” and “Adaptive Dose”. “

Quick Adjust” simply allows for quick addition or subtraction to the dosing schedule by percentage. For example a 
dosing total can be reduced quickly and easily by 10% if required and conversly increased as necessary. Because it 
is prudent to adjust parameters slowly, the maximum adjustment in either direction is limited to +/-15% as a safety.

 “Adaptive Dose” offers an unparalleled means of fine tuning a dosing regimen over time. It is highly advisable to 
run a dosing schedule for a week at minimum for best results in using “Adaptive Dose”. Once a schedule is run 
with a supplement for at least a week, perform a test for the parameter for which the supplement is being dosed. 
For example, test calcium levels for a supplment that primarily doses calcium. Under “Adaptive Dose” enter the 
“Measured Level” from the test. Use the default already entered or enter your own “Desired Level” and touch the 
“Calculate” button.

The app will ask you to move through 3 important steps.

1.  If the “Measured Level” is below the “Desired Level”, a dose will be recommended over 48 hours to move 

the level up to the desired level safely. If the “Measured Level” is above the “Desired Level”, it will be 
recommended to suspend dosing over 48 hours to allow the level to drop toward the “Desired Level” safely

2.  A recommendation will be made for a new schedule based on the difference in the “Measured Level” and the 

“Desired Level” and the previous dosing schedule success/failure.

3.  A recommendation will be made to setup a testing reminder to provide results to input back into the 

“Adaptive Dose” in a week.

Each of these steps allows for opting out of “Adaptive Dose”.

Utilizing all 3 steps provides for the ultimate in continued refinement of a dosing regimen of any supplement to 
achieve the best results with a doser on an aquarium. As you repeat the “Adaptive Dose” the doser hones in on the 
best regimen for that specific supplement for your specific aquarium.

After entering a schedule of any type you are brought to the doser’s dashboard.

Содержание sentia dose

















Отзывы: