Aquatronica evolution ACQ110, Инструкция по эксплуатации

Страница: 46 / 60

46 - 60
IsACQ110C-0 (ENG) Rev.230708-0
Temperature Menu
Insert
In this section it is possible to choose a desired temperature
and set a minimum and maximum tolerance for temperature
variation.
To adjust the temperature, proceed as follows:
Main screen

Main Menu

Temperature

Programs

Insert.
• Select a reference temperature with keys

and set the
value desired with keys

.
• Set the “ ∆ MIN” and “ ∆ MAX” tolerance values, selecting
the desired field with keys

and modifying its value with
keys

.
• Select “Plugs” with keys

to choose which outputs will
operate when the temperature is higher or lower than the set
values and then press “Enter”.
• Select the output to be utilized with keys

; the selected
output will flash on both lines. By operating on the upper line
of the outputs, it is possible to program the devices that will
be activated/deactivated when the temperature rises above
the maximum value established (Ref. + ∆ MAX).
The outputs of the upper line are set with key

.
The example indicated in the figure (Fig. 60) shows the activa -
tion of the cooler on outlet “B”. By pressing the key

once,
the outlet is highlighted and above it the thermometer sym -
bol appears. In order to deactivate an outlet (lights, heater,
etc.) the key

must be pressed a second time.
In this case, only the symbol of the thermometer appears over
the selected outlet.
Operating on the lower line outputs, the user can program the
devices that will be activated/deactivated when the temperature
falls below the minimum value established (Ref. - ∆ MIN).
The outputs of the lower line are set with key

.
The example indicated in the figure (Fig. 60) shows the ac -
tivation of the heater on outlet “E”. The outlet is highlighted
and the thermometer symbol appears above it.
(Fig. 59)
Programs
Ref. 27.0°C
∆ MIN: ∆ MAX:
0.3°C 0.5°C
Plugs Confirm
(Fig. 60)
Cooler
PU01 A B C D E F
PU01 A B C D E F