Aquatronica evolution ACQ110, Инструкция по эксплуатации

Страница: 32 / 60

32 - 60 IsACQ110C-0 (ENG) Rev.230708-0
Power Unit Menu
Wave Effect (Fig. 38)
This function can create one or more wave effects in an
aquarium.
To set this function, proceed as follows:
Main screen

Main Menu

Power Unit

Wave Effect.
Insert
• Two-pump Wave Effect without pause:
set the time interval which the effect will be produced, selec -
ting from the values “From” and “To”.
Choose the two pumps necessary for the effect from the list
of available outputs and assign an ON time for each pump (in
seconds) found on the right side of the screen.
In the example shown in the figure (Fig. 39) a Wave Effect has
been set from 14.15 to 17.15 every day of the week in which
the pumps “Pump SX” and “Pump DX” function alternately at
intervals of 10 seconds.
• Two-pump Wave Effect with pause:
set the time interval in which to produce the effect, setting the
values “From” and “To”.
Select the first and third fields and place in them the two pumps
to be used from the list of available outputs and assign an ON
time for each pump (in seconds) found on the right side of the
screen.
In the second field, select the “Pause option” and, on the
right side of the screen, set the amount of time for the pause.
In the example shown in the figure (Fig. 40) a Wave Effect
has been set from 14.15 to 17.15 every day of the week, in
which the pumps “Pump SX” and “Pump DX” function alter -
nately at intervals of 10 seconds with pauses of 5 seconds
after each pump turns off.
(Fig. 39)
Wave Effect
From 14:15 To 17:15
Pump SX 10s
Pump DX 10s
Not Defined 0s
Mo Tu We Th Fr Sa Su
(Fig. 38)
Wave Effect
Insert
(Fig. 40)
Wave Effect
From 14:15 To 17:15
Pump SX 10s
Pause 5s
Pump DX 10s
Mo Tu We Th Fr Sa Su