IsACQ210NMSC-0 (ENG) Rev. 250708-0
7 -16
Via dell’Industria, 20 - 42025 Cavriago (RE) Italy Tel.: +39 0522 494403
Fax: +39 0522 494410 http:\\www.aquatronica.com E-mail: [email protected]
The example in (Fig. 7) shows enabling of the pump
on socket “C”: pressing the
key once, the socket is
highlighted and the
µS
symbol appears above it.
To disable a socket, press the
key a second time;
in this case, only the
µS
symbol will appear above the
selected socket.
The outputs on the lower line determine which devices
will be enabled/disabled when the conductivity
goes
below
the set minimum value (Ref. - ∆
MIN); the outputs
on the lower line are set using the
key.
The example in (Fig. 7) shows disabling of the pump
connected to socket “C”; only the symbol
µS
ap-
pears.
After the desired sockets have been set, press
“Enter”
to return to the previous menu (Ex. Fig. 6).
The
“Confirm”
field is automatically selected: by press
-
ing
“Enter”
the inserted program is saved.
If different conductivity values are desired based on the
time of day, these can be set graphically.
To set this function, proceed as follows:
Main screen
Main menu
Conductivity
Programs
Insert.
•
Using the
keys, select the conductivity reference
parameter
(Ref.).
Using the
keys, select
“Curve”
(Ex. Fig. 8).
Afterwards move to the /\/\/\/\ symbol and press
“Enter”.
A screen opens where the desired conductivity value can
be graphically modeled over 24 hours (Ex. Fig. 9).
•
Using the
keys, select the time of day (in 2-hour
intervals, lower left corner). Using the
keys, modify
the conductivity value (lower right corner) for the se
-
lected time. When finished, press the
“Enter”
key.
(Fig. 7)
Pump
PU01 A B
C
D E F G H
PU01 A B C D E F G H
µS
µS
(Fig. 8)
Programs
Curve
/\/\/\/\
∆
MIN:
∆
MAX:
100 µS 200 µS
Sockets
Confirm
(Fig. 9)
18:00 850 µS
English
