Aquatronica ACQ140, Руководство пользователя

Страница: 33 / 56

33
When you unplug a sensor, after few seconds the Touch Controller shows the Disconnection Message.
You have two different possibilities:
1. Pressing Remove button, you remove definitively the sensor from the system. This operation erases from the
system all programs and settings of this sensor. If you reconnect the sensor after the remove command, the
sensor will be recognized as a new one.
2. Pressing Hide button, you accept that the sensor is not connected to the system. On the bottom bar of the
display it appears the ‘ ? ‘ symbol. All programs and settings remain in the system but they do not work. If
you reconnect the sensor to the system, it will work properly.
Pressing on a Sensor Icon in the Main Menu, it is possible to enter each dedicated Menu.
For example we show you the Temperature Sensor Menu, which is very similar to the other sensors Menu:
On the left part of the screen, you can find the Sensors Menu:
Plot Graph
Plot Graph
Measure Unit
Change Name
Calibration
Temperature
25,5 °C
Temperature Sensor
S
00-A
In this menu you can see graphically the stored data of
this sensor.
The length period of the graph is 24 hours and you can
change the graph day using the left and right arrows.
You can download these data using the PC web
connection.
Plot Graph
Measure Unit
Change Name
Calibration
Reload data
Temperature Sensor