DX18 Dimmable Hybrid Fixtures - Installation, Operation & Maintenance Guide
Models: 420624, 420625, 420626
www.aquaticlife.com
3
Step 6
– Install your LED fixture onto one or several of
the LED brackets. The rectangular bracket has multiple slots
where a screw can pass through to secure the LED fixture.
Step 8 – Press the cord management plugs in place to hold
the LED cords in the side channels. The included rubber strip
can be cut to the needed length and used to hold the cords in
the side channels.
Step 8 – Create a loop at the top of
the cables and secure the cable by
tightening the screws.
Suspend the fixture safely above
the aquarium.
Step 9 – To loosen the wire pulled
through the adjustment hardware,
press the small button that is
positioned around the wire at the
top of the hardware. Gently pull
down on the adjustment hardware
until the fixture is back to where
originally measured.
Step 7
– The LED cords will route through the channels on the
ends of the fixtures.
O
