AquaticLife 420624 Скачать руководство пользователя

Страница: 2 / 4

DX18 Dimmable Hybrid Fixtures - Installation, Operation & Maintenance Guide

Models: 420624, 420625, 420626

www.aquaticlife.com

FIXTURE ASSEMBLY

Step 1

– Turn the end of the suspension hardware counter-

clockwise to widen the end and insert into the opening in the

center of the fixture. Slide the suspension hardware to one side of

the fixture. Repeat with the other suspension cable and slide to the

opposite side of the fixture.

Step 2

– Turn the suspension top clockwise to lock in place.

Step 5

– Install the LED fixture mounting bracket between the two

T5HO fixture housings. The brackets rest in the channels on the

fixture housings and are secured with screws.

Step 4 – Install the T5HO lamps of your choice into the

silicone sockets.

Step 3

– Remove the reflector protective film.

IMPORTANT:

The sockets for the inside lamps

are marked with an “I”. The sockets for the outside

lamps are marked with an “O”.

Содержание 420624

Страница 1: ...ser for each cord connecting an aquarium appliance to a receptacle The drip loop is that part of the cord below the level of the receptacle or the connector if an extension cord is used to prevent wat...

Страница 2: ...e other suspension cable and slide to the opposite side of the fixture Step 2 Turn the suspension top clockwise to lock in place Step 5 Install the LED fixture mounting bracket between the two T5HO fi...

Страница 3: ...els The included rubber strip can be cut to the needed length and used to hold the cords in the side channels Step 8 Create a loop at the top of the cables and secure the cable by tightening the screw...

Страница 4: ...ny other defect not resulting from defects in the electrical components of the product or defects in materials or workmanship This warranty will not be effective unless and until the Aquatic Life prod...