1. Switch on your Bluetooth device.
2. Select ‘AQ-SWA8-6BT’ from the list of available devices to pair (no password is needed).
5.1.1 Pair with Bluetooth Device
Only one Bluetooth device can be paired with the Bluetooth Subwoofer at any time.
5.1 Listening via Bluetooth
5.1.2 Play Bluetooth Device
1. Bluetooth mode will be activated once a Bluetooth device is paired.
2. Play the song from device and the sound will play through the subwoofer.
3. Play/Pause, track forward/back and volume up/down can be controlled directly from your
Bluetooth device.
5.2 Listening via Auxiliary Input
1. Connect your MP3 device to the stereo RCA inputs.
2. Turn the Variable Voltage Input Selector switch to determine the best sound quality for
your input device (400mV, 2V or 4V). Smartphones will typically use the 4V setting.
The RCA input connections are designed for a full-range audio signal and when used in conjunction with a ‘sub’
output (typically a single green RCA) from your stereo source unit will mean the AQ-SWA8-6BT can only be used
as a subwoofer (i.e. without the 2x full-range speaker outputs).
If using a single RCA ‘sub’ output then an RCA Y adaptor must be used to provide input to both red and white
RCA inputs on the subwoofer.
5.3 Automatic Standby Mode
Automatic Standby mode will engage when the Combined Stereo Subwoofer does not see any
input from either the RCA’s or Bluetooth.
Once a signal is detected the unit will switch on again.
5.1.3 Bluetooth Multi-link
A second Bluetooth device can pair to the AQ-SWA8-6BT even when it has been paired to
another Bluetooth device. The second Bluetooth device will be able to play once the first
device has stopped playing.
Only one Auxiliary device can be used at any one time.
Listening to Devices
Combined Bluetooth Stereo Subwoofer AQ-SWA8-6BT
8
www.aquaticav.com
