1.2.1 Connections Diagram
If your AQ-BC-6BT-X was purchased from an Aquatic AV dealer and/or supplied with retail
packaging it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the
media player to power and speakers. Please proceed to section 1.3.1.
If your AQ-BC-6BT-X was supplied as a pre-installed waterproof entertainment system it will
utilise 3rd party wiring connections and is not supplied with the Aquatic AV 12-pin Harness.
Please proceed to section 1.4
1.3 12-pin Harness Connection (retail packaged models only)
All open wire connections should be soldered and protected against water and dust for best long-term performance.
*Retail packaged models only.
1.3.1 12-pin Harness Wiring Diagram
1. 12-pin Watertight Harness
3. RCA Auxiliary Outputs
2. RCA Auxiliary Inputs
5. 12V DC Triggers (2x red, 2x red/black)
4. Wired & Wireless Remote 8-pin DIN
Connectors (Black)
6. Power On LED
7. Bluetooth Halo Aerial
Connector
8. Power Attenuation Wires (1x white, 1x black)
9. Bridge Mode Wire (magenta)
No lower than a 2 Ohm load, or 4
Ohm in bridged mode, should be
used or damage may occur to the
B.
Make sure the polarity of
speakers are connected correctly.
Rear channel Bridge Mode (for subwoofer operation) is
selected when the magenta wire is cut. See section 1.7.
Rear channel Bridge
Mode (for subwoofer
operation) is selected
when the magenta wire
is cut. See section 1.7.
Getting Started
BlueCube Media Player AQ-BC-6BT-X
4
www.aquaticav.com
