Aquatic Access IGMT Скачать руководство пользователя страница 6

a wooden deck or in a concrete deck with a void 

beneath,  a socket plate installation  may be 

necessary.  If a socket plate is to be installed on a 

concrete deck with no void beneath, anchor bolts 

are used. 

For installations where there is access below 

the deck,  stainless steel bolts are installed 

through the deck and pre-drilled stainless steel 

strongbacks, then secured with nuts and bolts.  

These stainless steel supports  are available from 

Aquatic Access. 

Using the socket plate as a guide,  drill holes in 

the deck for the bolts and socket to pass through.  

If using strongback supports 

underneath, use the socket plate as 

a guide to position holes in them as 

well. 

Align the holes in the supports 

underneath with the socket plate 

above and insert bolts. Place washers 

and nuts on bolt and tighten securely.

For installations where there is a 

concrete deck with a void beneath, 

1/2” anchor bolts are used to 

secure the anchor plate in instances 

where there is no access to the 

void. For installations where there 

is an accessible void beneath a concrete deck, a socket plate is used with strongbacks in a 

configuration similar to that for wooden decks.

ASSEMBLY OF LIFT

Your IGMT pool lift has been assembled and tested in the factory before shipping.  All parts are 

included in  your shipment. Study the illustration of the lift in order to become familiar with its 

parts and their names. A reinforced garden hose connected to a nearby water source is needed 

to supply the lifting power. In cases of new construction, a water connection can be plumbed in 

specifically for the lift.  

The standard IGMT pool lift  is shipped in three cartons. 

2

Содержание IGMT



















Отзывы: