AquaTerra Fairfax, Руководство пользователя

Страница: 14 / 24

11
CONTROL PANEL OPERATION
The “heater” indicator lights up when the heater is on. It flashes when there is a request for
more heat, but the heater is not on. Once set temperature is reached the indicator shuts off and
the low speed of the jet pump turns off after 30 seconds (if not in filter cycle).
JETS OPERATION
Jet Pump 1 button:
• Press Jets 1 button once to turn Jet Pump 1 on low speed.
• Press Jets 1 button a second time to turn Jet pump1 on high speed.
• Press Jets 1 button a third time to shut Jet Pump1 off.
Jet Pump 2 button:
• Press Jets 2 button once to turn Jet Pump 2 On.
• Press Jets 2 button a second time to shut Jet Pump 2 Off.
MULTI COLOR LED LIGHT
Press the Light button once to turn on the lights, press the button again to turn
the lights off, when turning back on after several seconds the same light mode
will appear. Every time the light is quickly turned off and on a new light mode
will appear. The sequence is as follows: White, Aqua, Magenta, Azure, Amber,
Emerald, Ruby, color wheel with abrupt color changes, slow full color wheel
and fast full color wheel.
NOTE: If left on, the light will automatically turn off after 4 hours of operation.
MODE
CLEANUP MODE
Press the Mode button to start the cleanup cycle for one minute. The display
will show CLn” message. This mode forces a purge step of the programmed
filter cycle and is useful when the user wishes to cleanup the spa water after
use without waiting for the next filter cycle purge. When active, the display will
toggle between CLn and water temperature.
SOAK MODE
Press and hold the Mode button for 5+ seconds until SbY is displayed. The
soak mode clears all pending user demands as well as filtration and smart
winter mode. The only automatic feature that remains functional is the water
temperature regulation.
OFF MODE
Press and hold the Mode button for 8+ seconds until OFF is displayed. This function is useful to
preform simple spa maintenance. When enabled the display will toggle between OFF and water
temperature. This function will clear all pending user demands for 60 minutes. This mode will be
cancelled if the user starts a pump.
NOTE: If the spa is calling for heat it will take 1 minute before the jet pump will shut off.