W A T E R G A R D E N I N G T O T H E M A X
A Q U A T E C E Q U I P M E N T. C O M
TROUBLESHOOTING
Problem
Reason
Solution
WATER PUMP
NOT WORKING
No Power
Check that the plug is connected and
power point turned on.
Sponges and filter media blocked with
sludge.
Clean the sponges and filters.
Impellor is blocked with sludge or lime
scale build up.
Clean the Impellor as per the instructions.
Running without sufficient water.
Submerse the equipment underwater
then plug in. Refill if necessary.
Blocked Impellor chamber or
ceramic shaft is broken.
Clean the Impellor. Check for wear.
Replace if necessary.
WATER PUMP
IS NOISY
Blockage in pump.
Clear the blockage.
Impellor & Shaft worn out.
Replace Impellor & Shaft.
Impellor broken.
Replace Impellor.
Water valve closed on the inlet or outlet.
Open the valve and allow.
Unit inlet is blocked or the water pump
outlet is blocked.
Clear all blockages.
The height to which you are pumping is
too high for the given model of pump.
Select a bigger model.
Please consult your retailer for quality original PondMAX replacement parts.
Visit www.aquatecequipment.com for your nearest stockists.
E.&O.E.
PMAX EVOII 1900_2900_3900_4900 Pump Instructions.indd 10
7/11/17 7:52 am
