AquaSure HARMONY Series, Руководство пользователя

Страница: 22 / 36

19
www.AQUASURE USA .com
Tel: 1-800-661-0680
Flashing
Press the ENTER button to
accept and continue to the
next digit.
Press UP or DOWN buttons to
change Back Wash time (Minutes).
Range: 0 - 999
5. Setting the Back Wash Time
(Recommend keeping at factory default setting)
6. Setting the Brine Time
(Recommend keeping at factory default setting)
Set the Time
Default setting is
015
Press the ENTER key to adjust the
backwash setting.
(
bW
) Backwashing time allows the system to flush out any debris or particles that may enter the resin tank. It also helps create space in
between the resins to allow more contact surface for the next stage of regeneration.
The default setting is 15 minutes.
Flashing
1 2 3
Flashing
Press the ENTER Button
to accept and continue
to next digit.
Press UP or DOWN buttons to
change Brine time (Minutes).
Range: 0 - 999
Default setting is
060
Set the Time
Press the ENTER Key to adjust the
brine draw time setting.
Flashing
1 2 3
SEt- 5 -bW-
11 : 30
015 -bW-
11 : 30
(
bd
) Brine Draw pulls the brine water from the brine tank and allows the resin to mix with the brine water, regenerating the system. The
more contact time the system is set the more time it allows the resin to bond with the brine water.
The default setting is 60 minutes.
SET-6 -bd-
11
:
30
060 -bd-
11
:
30