AquaStar Loxone, Руководство по эксплуатации

Страница: 9 / 20

9 www.praherplastics.com
Add the Device into the Loxone Config 10
Before being able to use the Loxone Aquastar Air, it must be learnt-in. To do this the
Aquastar needs to be in learing mode.
10.1 Initial setup
When the Loxone Aquastar Air is powered up for the first time, the learning mode will start
automatically.
10.2 Re-learning in process:
To re-learn the Loxone Loxone Aquastar Air, simply press and hold the learn button for at
least 5 seconds. The Loxone Loxone Aquastar Air is now back in the learning mode.
The learn button is located on the Mainboard (red circled).
Be aware that the antenna is screwed on the SMA connector (yellow circled).
Once the unit is in the learning mode, the status LED flashes red-green-yellow in sequence.