4
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
• The integrated adjustable head allows for directional fl ow
control once it is already in position (Ex. 4).
Adjust the head to focus fl ow in the desired direction.
Ex. 3
Ex. 4
Note:
The powerhead will need to be accessed
occasionally for maintenance. Do not make the unit
inaccessible, allowing for access during maintenance
procedures.
NOTE:
When disguising the unit, provide
space around the perimeter of the unit
to avoid restriction of water intake.
Ex. 4
• Carefully unpack the Pond Powerhead (Ex. 1).
Instructions
Ex. 1
• The Pond Powerhead does not require any pipe or
plumbing, allowing for quick and easy installation in new
or existing water features.
• Set the Pond Powerhead(s) in the desired location(s) in the
pond or water garden (Ex. 2). Good installation locations
include stagnant areas with low water movement or debris
build-up.
Ex. 2
• Each time the powerhead turns on it will provide a slight
recoil. Therefore, we recommend setting the unit in a
location where the back of the unit is against a surface
which will prevent the pump from moving.
• If desired, the powerhead can be disguised into the pond
using rocks or other landscape materials (Ex. 3).
Maximum Flow
Rate (GPH)
Motor Type
Input Voltage
Input Frequency
Wattage
Amperage
Power Cord
Length
Pump
Dimensions
Approximately
2,000
Mag-Drive
12V
60Hz
40
3.33
20'
9.75"L x 5.75"W x
5.75"H
Pond Powerhead Specs
• Simply connect low-voltage cables using Aquascape
Garden and Pond 3-Way or 6-Way Splitters (Ex. 6). A
25' Extension Cable and 5-Outlet Extension Cable are
available, making wiring easier than ever with no splicing
required (Ex. 6).
• Multiple units can be easily installed in a single system
(Ex. 5).
Ex. 5
Pond Powerhead
Pond Powerhead
Skimmer
BioFalls
®
3-Way
Quick-Connect Splitter
12-Volt
Transformer