4
☎
US 1-866-877-6637 |
☎
CAN 1-866-766-3426 | www.aquascapeinc.com
saFety inForMation
WARNING:
Do not submerge the Pond Air Pump
in water. The Pond Air Pump is designed to be
placed in an indoor location that is protected
from the weather. The location needs to be dry and free
from airborne dust and debris. Failure to properly protect the
Pond Air Pump from the elements will void the warranty. To
provide continued protection against risk of electric shock,
connect to properly grounded, ground fault circuit interrupter
(GFCI) outlets only, using the following guidelines:
(A) Have a qualified electrician install a properly
grounded receptacle outlet, acceptable for outdoor
use and protected from snow and rain.
(b) Inspect cord before using.
(C) Do not use extension cords.
(D) Any wiring of pumps should be performed by a
qualified electrician to ensure code compliance
and user safety.
(e) Unplug pump at receptacle outlet when not
in use or before removal from pond.
(F) To reduce risk of electrical shock, all wiring
and junction connections should be made per local
codes. requirements may vary depending on usage
and location.
(g) The power cable should be protected at all times to
avoid punctures, cuts, bruises and abrasions.
(H) Never handle power cords with wet hands.
(I) Do not remove cord and strain relief. Do not connect
conduit to pump.
(J) Do not use power cable to lift pump.
(K) Products returned must be cleaned, sanitized, or
decontaminated, as necessary prior to shipment, so as
to ensure that employees will not be exposed to health
hazards in handling said material. All applicable laws
and regulations shall apply.
ImPORtANt:
Aquascape, Inc. is not responsible
for losses, injury, or death resulting from a failure
to observe these safety precautions, misuse or
abuse of pumps or equipment.
Pond air sPeCiFiCations
• Input Voltage: 120 Volts
• Input Frequency: 60 Hz
• Power Cord Length: 6 ft.
• Max Flow Rate:
Pond Air 2:
4000 cc/min x 2
Pond Air 4:
3500 cc/min x 4
• Max Air Depth:
Pond Air 2:
8.5 ft.
Pond Air 4:
9.2 ft.
installation
1. Carefully unpack the Pond Air system and select an indoor
location for the Pond Air Pump that is protected from the
weather. The location needs to be dry and free from
airborne dust and debris.If possible position or raise the
unit so it rests above the pond water level to help protect
the air pump from water damage.
DO NOt SUBmERGE
tHE POND AIR PUmP IN WAtER!
