©2018 Aquascape, Inc. • All Worldwide Rights Reserved
#86322 • 11/18
☎
US (866) 877-6637 |
☎
CAN (866) 766-3426 | aquascapeinc.com
6
LIFETIME WARRANTY
The AquaBasin
®
has a Lifetime Warranty against defective materials and workmanship.
Contact the installer or place of purchase if the AquaBasin
®
should fail. Warranty shall be
totally null and void in the event the AquaBasin
®
is abused, misused, or used for a
purpose other than for which the product is intended.
INSTALL AN OPTIONAL WATER FILL VALVE
• To install a Compact Water Fill Valve (#88006),
drill a ¾" hole approximately 4" from the top of
the basin (Ex. 14).
• Follow the directions provided with the fill
valve to complete the installation (Ex. 15).
Troubleshooting
If experiencing uneven water flow or excessive splash off, the feature may not be level. Level the
feature from side-to-side and front-to-back to ensure proper water flow.
STEP 4
ADD GRAVEL
• Lay a bed of gravel or river stones across the
deck of the AquaBasin
®
to effectively conceal
it into the landscape (Ex. 13).
Warranty Information
Ex. 11
Ex. 12
Ex. 13
ADD OPTIONAL LED LIGHTING
• Aquascape Garden and Pond LED Lighting
(not included) can be added to bring the water
feature to life at night.
• Deck cylinders can be drilled to run low
voltage lighting cables beneath the deck,
keeping them out of view (Ex. 11).
Ex. 15
Ex. 14
• Determine the desired location of each light
and identify which deck cylinders need to be
drilled. Then, using a spade bit or hole saw,
drill a 3/4" hole in each selected cylinder
designated for lighting cables (Ex. 12).
NOTE:
DO NOT modify areas labeled “DO
NOT DRILL.”
• Run each lighting cable into the top of the
drilled cylinder and out through the access
panel (Ex. 12). Be sure to make all necessary
connections outside of the basin.
