AQ1B Compact Underwater Metal Detector
User Manual
Using Arm Saver Kit with 38cm Loop
1.
Place the 38cm Loop on a flat level surface.
2.
Remove the Nut, Bolt and Washer from the Lower Shaft and place the “friction”
Washer in the recess on the Swivel Connector at the centre of the Loop as shown.
Washer in connector recess Nut, Bolt & Washer
3.
Next slide the end of the Lower Shaft over the Washer and the Connector as
shown below.
4.
Secure the Lower Shaft in place using the Nut & Bolt you removed from Lower
Shaft in step 2.
9
