Install the Filter
Remove plastic from filter cartridge and place
into dock with male end up.
Replace the top cover by pressing it firmly
down and rotate left until fully locked in.
With filtration dock facing forward, use grips on the left side of the top cover
to slide to the right until it lifts up and off.
RESET BUTTON
GRIPS
Once filter is installed, plug filtration dock into an electrical outlet.
Flush the System for one Cycle
with dispenser or pitcher
Dispenser
• Place lid on dispenser.
• Fill dispenser with cold water
through drop-shape.
• Place dispenser on the filtration
dock until fully locked in.
• Hold dispenser button down
until all water has
filtered through
the unit. Discard
water. Flushing is
complete.
Pitcher
• Place lid on pitcher.
• Fill center reservoir with cold water
through drop-shaped opening.
• Place pitcher on filtration dock until
locked in. It will automatically filter
and run until center reservoir is
empty.
• Wait for blue light to turn off.
• Remove pitcher and discard water.
Flushing is complete.
WATER
DISPENSE
BUTTON
Please note:
Water may leak from circular valve when placing dispenser onto dock.
It
may take
2-4 MINUTES
or more for
water to begin
flowing on
1st run
To dispense filtered water, push
button on reservoir lid. There
will be a 5-10 second delay for
water to filter through.
Please wait for system to finish
filtering before removing the
dispenser from the dock.
Once dispenser is removed
there may be residual water left
on the dock; this is normal.
The system will run until the
center reservoir is completely
empty. Do not refill center
reservoir if water remains in
outer reservoir.
Please wait for blue
light to turn off before
removing pitcher
from dock.
Watch A Setup
Video Online
aquasana.com/cwmsetup
