9
and weaken the main standard. If you notice deep grooves all around the main
standard, or any severe dents, please replace the main standard with a new
original one as soon as possible.
Deep grooves or severe dents on the main standard, caused by a
lawnmower or a wheelbarrow for example, can weaken the main standard,
which can fall down due to strong wind or uneven distribution of laundry on the
airer, and can cause physical injury.
You can obtain a new main standard, stating your type of clothes airer, directly
from us. Replace other spare parts such as pulleys and rivets always with approved
original spare parts, only these will ensure the safe function your clothes airer.
7. Check contents and clothes airer
ATTENTION! Danger of damage!
The clothes airer might get damaged if you open the package carelessly. Do
not use sharp objects when unpacking.
1. Remove the clothes airer from the packaging.
2. Remove the packaging material and all protective foil.
3. Check if the delivery is complete (see
fig. A
).
4. Check if the clothes airer or single items are damaged. Please do not use the
clothes airer if this is the case. Contact the manufacturer using the service
address provided on the warranty card.
8. Installation of the ground anchor
Choose a location where the clothes airer can rotate freely. Depending on the soil
you can either screw-in the ground anchor or fix it in concrete.
1. Remove the transport protection from the tip of the screw-in ground anchor
(see
fig. E
).
2. Remove the protective caps
4
from the cover
5
.
3. Hook the cover in the holder of the ground anchor
8
until it engages
(see
fig. F
).
8.1 Install the ground anchor
The ground anchor can be screwed into the ground (ground level) using the
included screw-in tool
3
and
7
.
1. Put the two protective caps
4
onto the ends of the alu-tube
7
(see
fig. G
).
2. Insert the alu-tube
7
through the upper openings of the screw-in tool
3
.
GB
IE
NI
