aquanique PC UVC 9 W, Руководство по эксплуатации

Страница: 12 / 41

- EN -
12
Intended use
Pond Clarifier PC UVC 9 W, referred to as "unit", may only be used as specified in the following:
•
For cleaning garden ponds.
•
For operation with clean water.
•
Operate in accordance with instructions.
(→ Technical data)
The following restrictions apply to the unit:
•
The UVC clarifier installed in the device kills algae and bacteria in the pond water. The UVC lamp may never be used
for any other purpose or outside of the housing.
•
Do not use for commercial or industrial purposes.
•
Never use the unit with fluids other than water.
•
Not to be used for sterilising drinking water or other fluids.
•
Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
Installation and connection
Prerequisite
•
The unit head is removed.
(→ Dismantling the unit head)
Installing the unit
How to proceed:

B
•
Only install the unit in the permitted positions to ensure fault-free operation.
•
Allow sufficient space for carrying out maintenance work.
Establishing the connections
How to proceed:

C
1. Shorten the stepped hose adapter to the diameter of the hose used if necessary.
– This reduces pressure losses.
2. Slip the hose clip over the hose, fit the hose onto the hose connector and secure with the hose clip.
– In the case of a stepped hose adapter with separate union nut, first push the union nut over the hose.
3. Connect the stepped hose adapter with seal to the casing.
– Connect the inlet and outlet.
– Hand tighten the stepped hose adapter.
Commissioning/start-up
Prerequisite
•
First switch on the pump, then the UVC clarifier.
•
Check all connections for leaks.
Switching ON/switching OFF
•
Switching on: Insert the power plug into the socket.
– The unit switches on immediately.
•
Switching off: Disconnect the power plug.
Check the function.

D
•
The function display is lit when the UVC lamp is switched on.