Aquanami JETANGLER, Руководство оператора

Страница: 75 / 114

- 73 -
Engine Oil Level
NOTICE: Check oil level frequently and refill if necessary. Do not overfill as it can
cause smoke and reduction in power. Operating the engine with an improper level may
severely damage the engine and void the warranty.
CAUTION: Certain components in the engine compartment may be very hot. Direct
contact may result in skin burn.
Oil level can be checked with watercraft either in or out of water. Before checking the
oil level on this engine, the watercraft must be level. The engine should be warm. Start
engine for 20 seconds to warm up oil if necessary. Reinstall dipstick and push in
completely. Remove dipstick and read oil level. The oil level should be between the
indicated marks on the dipstick.
Use a funnel to add oil. You may find it is helpful to attach 12
MM (½ in) ID hose of 6
inches long to the funnel for filling oil. Add the recommended oil to the proper level. Do
not overfill.
Every time oil is added in engine, do following steps to ensure correct oil level:
1. Start engine, idling for 20 seconds, then stop engine.
2. Wait for 2 minutes then recheck the oil level. This is required to allow the oil to
flow evenly in the oil chambers and to prevent a false oil level.
The oil change may be performed by an authorized AQUANAMI dealer, repair shop, or
person of your own choosing.
Oil Filter
Replace oil filter according to Maintenance Chart. Use AQUANAMI supplied oil filter.
The oil filter change may be performed by an authorized AQUANAMI dealer, repair
shop, or person of your own choosing.
Engine Breathing Oil Retainer
Located in engine compartment. Remove and retain oil mist and oil from engine crank
case breathing path. Check the bottle periodically and clean any oil residue to keep
engine breathing freely and to keep the engine compartment clean.