Aquanami JETANGLER, Руководство оператора

Страница: 64 / 114

- 62 -
Jet Pump Water Intake and Impeller Cleaning
Weeds, shells or debris can get caught on the intake grate, drive shaft and/or impeller.
A clogged water intake may cause troubles such as:
Cavitation: Engine speed is high but watercraft moves slowly due to reduced jet
thrust, jet pump components may be damaged.
Overheating: Since the jet pump operation controls the flow of water to cool the
exhaust system, a clogged intake will cause the exhaust to overheat and
damage exhaust components.
A weed clogged area can be cleaned as follows:
Manually remove the weeds, shells or debris from drive shaft and jet. Start engine and
make sure watercraft operates properly. If system is still blocked, move the watercraft
out of the water and remove blockage manually.
CAUTION: Inspect water intake grate and impeller for damage. Refer to an authorized
Aquanami dealer for repair as necessary.