Aquanami JETANGLER Скачать руководство пользователя | Manualshive

Страница: 110 / 114

background image

- 108 -

period under the conditions described herein. No claim of breach of warranty shall be
the cause for cancellation or rescission of the sale of the AQUANAMI watercraft to the
owner.

In the event that service is required outside of the country of original sale, the owner
will bear responsibility for any additional charges due to local practices and conditions,
such as, but not limited to freight, insurance, taxes, license fees, import duties, and any
and all other financial charges, including those levied by governments, states,
territories and their respective agencies.

AQUANAMI reserves the right to improve or modify products from time to time without
assuming any obligation to modify products previously manufactured.

8. TRANSFER

If the ownership of a product is transferred during the warranty coverage period, this
warranty shall also be transferred and be valid for the remaining coverage period
provided that AQUANAMI is notified of such transfer of ownership in the following way:

1. The former owner contacts an authorized AQUANAMI dealer and gives the
coordinates of the new owner; or

2. AQUANAMI or an authorized AQUANAMI dealer receives a proof that the former
owner agreed to the transfer of ownership, in addition to the coordinates of the new
owner.

9. CONSUMERASSISTANCE

In the event of a controversy or a dispute in connection with this AQUANAMI limited
warranty, AQUANAMI suggests that you try to resolve the issue at the dealership level.
We recommend discussing the issue with the authorized AQUANAMI

dealer’s service

manager or owner. If the issue has not yet been resolved, please submit your
complaint below:

By phone: 1-562-513-5001

By email: [email protected]

By mail: Aquanami Assistance

809 Grandview Dr.

Hampstead, NC 2844

«
...
108
109
110
111
112
...
»

Содержание JETANGLER



















































































































Отзывы:

Нет отзывов

Похожие инструкции для JETANGLER

Бренд: KAYAKS2FISH Страницы: 20

Бренд: YAMARIN Страницы: 40

GB-WPBP6 Series

Бренд: Westport Страницы: 10

Cross 49 Bow Rider

Бренд: YAMARIN Страницы: 42

Бренд: Quantum Sails Страницы: 11

Бренд: Volvo Penta Страницы: 76

Offshore Series

Бренд: Nauticstar Страницы: 84

Бренд: Yamaha Страницы: 144

Бренд: Grady-White Boats Страницы: 80

Бренд: MRS Страницы: 12

Бренд: Jones Brothers Страницы: 64

Бренд: Gloucester Yachts Страницы: 10

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды