AQUAMA FREEDOM PURE, Руководство пользователя

Страница: 5 / 7

www.aquama.com www.aquama.com
9 8
FREEDOM PURE
®
• Connect the aquama
®
device base to the adapter. The base beeps and the button lights up.
• Fit the jug onto the base.
For 1 litre of water:
• Fill the jug to the fill line with tap water.
• Dosages: - 1 level white spoonful of aquama
®
Indigo salt with 1x activation, LOW mode,
for a very light disinfection.
- 2 level white spoonfuls of aquama
®
Indigo salt with 1x activation, HIGH mode,
for an intense disinfection.
• Stir the saline solution 7 to 8 times with the blue spoon.
If the salt does not dissolve, the machine will not operate.
• Close the lid of jug.
• Push the power button to activate the solution. A flurry of bubbles is generated in the jug and
the solution goes cloudy, a sign that the process is correctly underway.
The operation takes a few minutes (5 minutes in “HIGH” mode, 3 minutes in “LOW” mode)
• The device beeps 1x to indicate the end of the operation. The LED switches off.
• Place the pure generated solution into the spray bottle. Your aquama
®
solution is ready for use!
• Disinfecting action: Spray the solution directly onto the surface in question, leave on for at least
5 minutes for an anti-bacterial action or 15 minutes for a fungicidal action, and then wipe.
• After 7 days, if any unused solution remains, you may reactivate it by pouring it back into
the Freedom
®
Pure device (without adding salt).
5.1 Important information
• Do not use Rock Salt as the additive. The unit may be damaged.
• If the device does not function, see page 10.
• Do not overuse additives
• The unit may not work properly if additives are not completely dissolved.
• After each activation, a 3 minute pause is automatically programmed to allow the module to cool down.
The unit will beep to inform you that you can resume the process.
• If the device does not function, call your nearest distributor or aquama
®
.
5.2 Water quality
• You may use tap water with average hardness.
• Use water with a pH range of pH6 - pH8, and a hardness of less than 200 ppm.
• Low calcium water is recommended.
• Do not use ground water, polluted water or excessively hard water.
• Water temperature range: 5°C to 40°C only.
SECTION 4.0 / How to use and activate the Freedom
®
unit
(see page 4 - videos on the aquama
®
YouTube channel or on your aquama
®
application)
SECTION 5.0 / Important information
SECTION 7.0 / Product Maintenance
7.1 Maintenance
Observe the precautions for use point 3.2.
7.1.1 Cleaning
Wipe the body and inside of jug with a warm damp cloth.
Do not use any chemicals or detergent.
Do not separate the black seal from the rest of the jug. Clean with a reasonable amount of force.
CAUTION: It is recommended to regularly descale the device before a limescale film forms
on the seal at the bottom of the jug. Use a food-quality descaling solution (such as vinegar)
without activation.
7.1.2 Drying
Empty the jug and dry it before storing.
Pass an aquama® microfiber to dry the module.
7.1.3 Storage
Store dry, at room temperature, protected from direct sunlight.
7.2 Warranty
Your Freedom
®
Pure is covered by a warranty, except for problems resulting from incorrect handling
or a failure to follow the usage instructions.
In observance of the device instructions, your aquama
®
Freedom Pure
®
is covered by a two-year warranty.
Contact your (country) distributor or consult www.aquama.com if you have any questions.
100% Biodegradable
100% Efficient