AQUALUX DUO Electrolyse + pH 105448, Инструкция по установке и уходу

Страница: 31 / 56

DUO AQUALUX – PAPI004070 – FR – EN – DE – Rev.03.16
14
3
ADDING SALT

Type of salt: high purity pellet salt in compliance with the standard EN 16401 Quality A (without any
flowability agent and anti-caking agent).

Ideal salt level at the season’s start = 5 kg/m
3
.

Starting up: salt quantity (kg) = 5 x the volume of the pool in cubic meter (m
3
).

Salt adding :
Quantity of salt to add (in kg)
Actual salt
rate (Kg/m
3
)
Pool’s water volume (m
3
)
10 20 30 40 50 60 70 80 90 100 110 120
0 50 100 150 200 250 300 350 400 450 500 550 600
0,5
45 90
135 180 225 270 315 360 405 450 495 540
1
40 80
120 160 200 240 280 320 360 400 440 480
1,5
50 100
150 140 175 210 245 280 315 350 385 420
2
30 60
90 120 150 180 210 240 270 300 330 360
2,5
25 50
75 100 125 150 175 200 225 250 275 300
3
20 40
60 80 100 120 140 160 180 200 220 240
3,5
15 30
45 60 75 90 105 120 135 150 165 180
4
10 20
30 40 50 60 70 80 90 100 110 120
4,5
5 10
15 20 25 30 35 40 45 50 55 60

Directly add the salt into the pool (place the bags of salt around the pool) and leave the filtration on
manually for 24 h (the device should be switched off).
You can now switch on the device.
SELF-CLEANING OF THE CELL
This device is equipped with an automatic cleaning of the chlorinator cell by a polarity inversion of the cell’s
poles. For an optimum cleaning of the chlorinator cell, these inversion frequencies must be adjusted
depending on the water hardness of your water (freshwater, hard water or very hard water).

Adjust your inversion frequencies (code “in” in the setting menu):
TH (mg/l CaCo3) 0 - 50 50 - 120 120 - 200 200 - 400 400 – 600 >600
TH (°f) 0 - 5 5 - 12 12 - 20 20 - 40 40 - 60 > 60
Inversion frequency (hours) OFF 10 8 6 4 2
Important: the automatic cleaning of the cell does not have authority to compensate a hardness of very
high water. Beyond a TH of 60°f, first of all, it is imperative to act on the balance of the water to lower its
hardness.
POOL EQUIPPED WITH A POOL COVER (depending on model)

If your pool is equipped with a pool cover, the chlorine production must be reduced when the shutter
is shut.

The device is equipped with a function that will take care of it automatically.

Select chlorination display.

Press 3 seconds on and then enter in the chlorination menu, « In » flashes.

Activate the pool cover mode (Code “Co” in the control menu, see § 4.2) and confirm with .
4
2
V