Quartz Digital Concealed
installation instructions
Page 16
Cut the outlet pipe to the finished length (55mm – 150mm measured from
the finished wall surface) using a rotary type cutter.
1
Ensure the pipe is clean and free of dust and
slide the fixing bush on the pipe flush with the
finished wall surface.
2
Connect the hose to the wall outlet assembly
after passing it through the gel hanger / hose
restraint (if required) and run the shower for
15 seconds without the handset attached to
clear any internal debris, which may be present.
13
Attach the conical end of the hose to the
shower handset, taking care not to twist the
hose, and place in the handset holder.
14
Fixed head
