Aqualisa MIDAS 110, Руководство по установке

Страница: 4 / 36

CONNECTION TO SUPPLIES
The Midas product range is designed for conventional supplies with HOT
on the LEFT and COLD on the RIGHT as viewed from the front.
Supply lines must be flushed clear of any debris before installation of the
unit. Any debris accumulation in the shower valve and head may result in
damage and poor performance.
Flushing
Some modern fluxes can be extremely corrosive and, if left in contact, will
attack the working parts of this unit. All soldering must be completed and
the pipework thoroughly flushed out in accordance with current Water
Supply Regulations prior to connection of the product.
Filters
To ensure optimum ongoing performance, the Midas product range is
protected by inlet filter assemblies in the internal waterways. Debris
accumulation may result in progressively reduced flow through the
showerhead and noisy operation. As this condition is not covered by our
standard warranty terms, it is suggested that the cartridge be removed
and the filters checked by a competent person at least every 12 months.
In the event of any difficulties please contact the Aqualisa customer
helpline for assistance.
Isolation valves
Suitable full bore isolation valves must be fitted to both supplies in
accordance with current Water Supply Regulations and our terms of
warranty. Due to their restrictive characteristics, stopcocks and ball type
valves that reduce the pipe bore size must not be used on gravity
or boosted gravity installations.
4