HiQu Digital Bath
installation instructions
Page 11
Unscrew the single fixing on top of the
processor box and carefully tilt the lid up
and off the location lugs and pull the lid
clear.
16
Connect the processor power lead to a
double pole 3 amp fuse switched spur in-
corporated in the fixed wiring circuit,
in
accordance with current wiring rules. En-
sure that this is located in an
ac-
cessible, dry location and not in the
bathroom.
15
THIS APPLIANCE MUST BE EARTHED
We recommend protecting surface mounted cables in suitable ap-
proved conduit to avoid the risk of damage from vermin.
The data cable and power lead should also be clipped in place with ‘P’
clips or similar to avoid accidents.
!
Connect the low voltage data cable into
the socket adjacent to the temperature ad-
juster as indicated on the label.
Feed
the cable out of the processor box
en-
suring it is correctly routed within the data
cable channel.
17
A further data cable socket has been provided for use with a secondary
Digital remote start/stop controller. This can be accessed by carefully
snapping and removing the entry pillar and connecting the cable as de-
scribed above.
!
