background image

6

On Ranges Equipped with a Warming Drawer or Premium 
Storage Drawer:

On ranges equipped with a warming drawer or premium 
storage drawer, the rear legs cannot be accessed by 
removing the warming drawer or premium storage drawer. It 
will be necessary to adjust the rear legs from outside the 
range. Use wrench or pliers to lower the front and rear 
leveling legs one-half turn.

Install Anti-Tip Bracket

1. Remove the anti-tip bracket from where it is taped inside the 

storage drawer or warming drawer.

2. Determine which mounting method to use: floor or wall.

If you have a stone or masonry floor, you can use the wall 
mounting method. If you are installing the range in a mobile 
home, you must secure the range to the floor.

3. Determine and mark centerline of the cutout space. The 

mounting can be installed on either the left side or right side 
of the cutout. Position mounting bracket against the wall in 
the cutout so that the V-notch of the bracket is 
12

⁹⁄₁₆

" (31.9 cm) from centerline as shown.

4. Drill two 

¹⁄₈

" (3 mm) holes that correspond to the bracket 

holes of the determined mounting method. See the following 
illustrations.

Floor Mounting

Wall Mounting

5. Using the Phillips screwdriver, mount anti-tip bracket to the 

wall or floor with the two #12 x 1

⁵⁄₈

" screws provided.

6. Move range close enough to opening to allow for final 

electrical connections. Remove shipping base, cardboard or 
hardboard from under range.

7. Move range into its final location, making sure rear leveling 

leg slides into anti-tip bracket.

8. Move range forward onto shipping base, cardboard or 

hardboard to continue installing the range using the following 
installation instructions.

A. Rear leveling leg
B. Wrench or pliers

C. Front leveling leg

B

C

A

WARNING

Tip Over Hazard

A child or adult can tip the range and be killed.

Install anti-tip bracket to floor or wall per installation 
instructions.

Slide range back so rear range foot is engaged in the 
slot of the anti-tip bracket.

Re-engage anti-tip bracket if range is moved.

Do not operate range without anti-tip bracket installed 
and engaged.

Failure to follow these instructions can result in death 
or serious burns to children and adults.

A. 12

⁹⁄₁₆

" (31.9 cm)

B. Bracket V-notch

Rear position

Front position

Diagonal (2 options)

A

Centerline

B

Содержание W10403812B





















Отзывы: