AQUAHEAT AS110, Руководство пользователя

Страница: 15 / 30

12
c. Temperature Setting
Press “ ” and “ ” to display and set temperature.
d. Mode Selection
1) Heating/Cooling/Auto mode
Press “ ” to switch among heating” ”, cooling” ” and automatic” ” mode.
Heating mode
“ ”: Water setting range(18-40 ℃
)
Cooling mode
“ ”: Water setting range(12~30
℃
)
Automatic heating/cooling mode
“ ”: Water setting range(12~40 ℃
)
* When water inlet temperature is higher than setting point, automatic cooling mode starts.
* When water inlet temperature is lower than setting point, automatic heating mode starts.
2) Press
“ ” to switch among boost mode” ”, silence mode” ”.
Default mode: boost
Please choose boost mode for initial heating
e. Wi-Fi
“ ”
When the screen is on,
press “ ”for 3 seconds, after “ ” flashing, enter Wi-Fi connection.
Connect Wi-Fi on mobile phone and input password, then control equipment by Wi-Fi. When APP
connects Wi-Fi successfully
，
“ ” lights on.
f. Defrosting
1) Automatic defrosting: When machine is auto defrosting, will flash, and return to previous
working mode when it finishes.
2) Manual Defrosting: To enter forced defrosting mode, the compressor must be working more than 10
minutes. in heating mode, press
“ ” and “ ” on touch controller simultaneously for 5 seconds
to start forced defrosting,
” ” is flashing and defrost starts, “ ” stop flashing and defrosting stops.
(Remarks: the interval between manual defrosting should be more than 30 minutes.)
g. Round Controller Running Status Checking
1. Press “ ” for 5 seconds, it will enter running status checking.
2. During this time, the display will show the status symbol “C0” and its corresponding value.