Aquaguard AGWAV20, Руководство пользователя, Страница: 12 / 24

Installation Preperation
The system cell MUST be installed horizontally, with the ports down, as the last piece of pool
equipment in line, on the return to the pool, a � er the heater. (See illustra � on 1 on next page) The
design of the cell forms a natural gas trap. Even though the system has an internal fl ow sensor,
this installa � on provides a secondary safety feature to prevent gas build-up within the system. Note:
The inlet is labeled on the cell housing with an arrow poin � ng up. The cell housing should be located 6
inches above the height of plumbing: in the event there is no heater, the cell should be located above
the height of the fi lter inlet and outlets. Any standard PVC cement may be used. Always use PVC
cleaner to prep all glue joints. Allow adequate drying � me before turning on the pump. All of the fi� ngs
are 2 inch PVC, and if necessary can be reduced to 1½ inch PVC. The cell has a 10 foot power cord, and
cannot be modi fi ed; use precau � on to place the cell housing within reach of the Control Center.
The Control Center is shipped wired for 220V . The control center can be converted to 120V in the
fi eld by a pool professional or cer �fi ed electrician; a wiring diagram for making the conversion in
included with each system. Ques � ons on this process should be directed to SGS tech support at
1-866-972-7258; opera � ng hours for speaking to a technician at the factory are 7:00 AM to 3:00 PM
Arizona � me, Monday through Friday.
The system is designed to power on ONLY when the primary pump is opera � ng and should be
wired to the load side of the � me clock . It must be grounded with an 8AWG bonding wire from the lug
(see illustra � on #2 on page 15 ) on the bo � om of the Control Center to a grounding rod (this is
necessary to protect the integrity of the electronic systems). Note: systems are not
recommended to be installed on pools using a stainless steel liner or stainless steel plumbing.
LOAD
LINE
110/220VAC
POWER
SOURCE
6” VERTICAL
CONTROL
CENTER
POOL
RETURN
SPA
RETURN
FROM
POOL
FROM
SPA
12