Aquaguard AGWAV20, Руководство пользователя, Страница: 11 / 24

Chlorinator Installation
The
Chlorinator must be installed by a quali fi ed pool professional or cer �fi ed electrician.
If you have any ques � ons or need assistance in fi nding a quali fi ed installer, please contact our
tech support hotline at 1-866-972-SALT (7258) or (480) 385-3052, Monday through Friday, from
7:00 AM to 3:00 PM Arizona
� me, or via E-Mail at: services@sgschlorinators.com .
Your Chlorinator includes the following:
1 Control Center
1 Cell Housing
1 O-Ring
1 Jumper Wire
1 Electroly � c Cell with cord, and Cap
1 Moun � ng Bracket
1 Cleaning S � ck – A cid R eplacement D evice
1 Owner’s Manual
1 Wiring Conversion Literature (LOCATED ON BOX)
The following tools will be required to install the system:
- Screwdriver
- Level
- Hacksaw / or PVC cu � er
- Wire Stripping Tool
- Electric Drill
- 8AWG Copper Bonding Wire
INSTALLING THE CONTROL CENTER WARNING!
When using electrical products, basic
precau � ons should always be followed: be sure to read and follow safety instruc � ons
on pages 4 though 6.
DANGER: Risk of electric shock, which can result in serious injury or death. Before
a � emp � ng installa � on or service, make sure that all power to the circuit supplying
power to the system is disconnected / turned o ff at the circuit breaker. Connect only
to a circuit protected by a ground fault circuit-interrupter (GFCI).
11