13
M
aintenanCe
1. Clean Strainers
The RSM is equipped with 2 strainers that should be cleaned periodically - the Inline Strainer
(Part #71) at the bottom of the Flow Control Valve and the Pump Screen on the Pump. Check
strainers and remove any trapped debris.
2. Flush Out Tank
The tank should be rinsed regularly, especially if using chemicals. Remove drain plug
(Part #351) and, using a garden hose, thoroughly flush tank and pump of any sediment.
3. Explosion-Proof Motor
The main motor is a permanently sealed and lubricated motor. Any disassembly for service or
repair will void warranty and could eliminate the explosion-proof properties of the motor. If a
motor should fail, a replacement motor will be required.
4. Inspect Blade Assembly
Clean the blade assembly about once a year, especially if a film of calcium or mineral deposits
is visible on the exterior of the blades. Remove any build-up from the blades and any debris
from blade passageways. While cleaning, inspect for irregularities or hairline cracks and
replace as necessary.
5. Storage
Protect your mobile Aquafog from winter damage. Expansion due to freezing can burst the
fittings or the internal feed pump. If storing unit in below freezing temperatures, be sure all fluid
is drained from the tank area. Damage due to freezing is not covered under warranty.
DISCONNECT AND LOCK OUT POWER SOURCE
BEFORE SERVICING
WARNING
e
leCtriCal
S
CheMatiC
Note: All green wires
go to ground
Denotes Line Connection
Denotes Wire NutTermination
Electrical Schematic Code Desination
2, J, 5
N
mtr
FAN
mtr
PUMP
115 VAC
LINE
4
1, 3, 8
Brown
Blue
115V
115V
