background image

 

Aquafog and accessories are warranted to the original purchaser 

against defects in material and workmanship under normal use for one 

full year from date of purchase. Any part determined to be defective and 

returned to the manufacturer, shipping cost prepaid, will be repaired or 

replaced at Jaybird Manufacturing, Inc.'s discretion without charge. Proof 

of purchase date and an explanation of the problem or complaint must 

accompany the returned portion of the machine.

 

Jaybird Manufacturing, Inc. reserves the right to verify the legiti-

macy of claimed defects. The provisions of this warranty do not apply to 

damage resulting from direct or indirect misuse, negligence, accident, 

lack of maintenance, or unauthorized repairs or alterations which affect 

the machine's performance or reliability.

 

LIMITATIONS OF LIABILITY. TO THE EXTENT ALLOWABLE UNDER 

APPLICABLE  LAW,  JAYBIRD  MANUFACTURING,  INC.'S  LIABILITY  FOR 

DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR CONSEQUENTIAL 

OR  INCIDENTAL  DAMAGES  ARISING  FROM  THE  USE  OF  OUR  EQUIP-

MENT IS EXPRESSLY DISCLAIMED. JAYBIRD MANUFACTURING, INC.'S 

LIABILITY  IN  ALL  EVENTS  IS  LIMITED  TO,  AND  SHALL  NOT  EXCEED, 

THE PURCHASE  PRICE PAID. NO OTHER WARRANTY, EXPRESSED OR 

IMPLIED,  IS  AUTHORIZED,  INCLUDING  WARRANTIES  OF  MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

This warranty gives you specific legal rights, and you may also have other 

rights, which vary from state to state.

1

year

O

NE

 Y

EAR

 L

IMITED

 W

ARRANTY

Made in U.S.A.

© 2020  Jaybird Mfg., Inc.

Jaybird Manufacturing, Inc.

135 Summer Lane

Centre Hall, PA  16828

Parts & Service:     1.814.364.1800

Website:           www.jaybird-mfg.com

Содержание HYDRO SS 700













Отзывы: