Where to Locate
NOTE: THIS UNIT IS SPECIFICALLY DESIGNED TO BE HUNG
Mount the fan high overhead in the largest available
open area. As a general rule, the higher the better
when mounting your fan. Allow one foot above the
unit and adequate room in front of and below the fan
for the unobstructed propulsion of the fog.
Mount the fan near the intake end of a ventilated
structure and propel fog in direction with air flow. In structures with no
ventilation, install the unit at the largest, most open end and propel the
fog towards the opposite end.
Utilize the pivoting fogging head in order to maximize the unit’s
performance.
DO NOT
propel the fog into the wind or direction of airflow.
DO NOT
pivot the fogging head to propel fog at a sharp downward angle.
DO NOT
cramp the fan in tight spaces or skinny aisleways.
DO NOT
mount the fan near the ground or underneath tables or benches.
This would result in a high loss of fog onto the ground, though it
would not cause mechanical harm to the unit.
HANGING GUIDELINES
7'
OSHA regulations require
unprotected fan blades to be
mounted 7’ or higher from the
working surface.
AQU
AFO
G
HYDR
O
SS
