Step 3.2
Ensure the bottom rail is level and straight then secure it onto the tray using the bottom rail end fixing(Part 16)
and screw ST4x40(part 17).Then insert the black soft head into the hole on the bottom rail end fixing(Diagram 3.2)
Step 3.3
Assemble the bottom rollers onto the door panel.Ensure the gasket has been used on both faces of the glass.
3.1
3.2
Step 3.4
Carefully lift the door panel and assemble onto the bottom rail, fit the glass clamp(Part 25) to hold the fixed
panel and door panel in place.
IMPORTANT:TURN THE ROLLER BODY TO ENSURE THE EDGE OF THE CUT ON THE ROLLER BOTTOM DOES
NOT TOUCH BOTTOM RAIL TOP SURFACE BEFORE SLIDING THE DOOR PANEL
3.3
3.4
Step 3.5
Adjust the roller to raise or lower the door panel to ensure it does not touch the ground or tray(Diagram 3.5),
also ensure that the overlap of the fixed panel and door panel is equal at the top and the bottom.Slide the door
panel to ensure it’s running smoothly.
Tips:If the door panel does not run smoothly please check that the bottom rail is 100% straight,and check that the
wall profile is 100% level.
3.5
IMPORTANT
Step 3.1
Insert the bottom rail (Part 12) into the end cap (Part 10)
（
Diagram 3.1
）
.
6
