AquaCraft Pro Fisherman, Руководство по сборке и эксплуатации

Страница: 2 / 8

INTRODUCTION ..............................................................2
SAFETY PRECAUTIONS ......................................................2
REPAIR SERVICE ................................................................2
SPECIFICATION & DESCRIPTION CHANGES ..................2
ITEMS REQUIRED FOR COMPLETION ..............................3
USEFUL TOOLBOX ITEMS ................................................3
BOAT TERMINOLOGY ......................................................3
FINAL ASSEMBLY ..............................................................3
KEEP ON BASSIN’ ..............................................................5
ORDERING REPLACEMENT PARTS ....................................5
EXPLODED VIEWS ............................................................7
Thank you for purchasing the Pro Fisherman
™
! We at
AquaCraft know how exciting a new R/C boat purchase can
be and we know you’re anxious to get started, but please take
time to read these instructions carefully and completely
before attempting to operate your model. This manual
contains the instructions you need to safely operate and
maintain your boat. As with any hobby, there is the possibility
of injury. Arming yourself with knowledge is the best way to
avoid injury.
If for any reason you think that this model is not for you,
return it to your local dealer immediately. PLEASE NOTE:
Your hobby dealer cannot accept a return on any model
after the final assembly sequence has begun.
• Adult supervision is strongly recommended! Children
should be warned about the dangers of playing in close
proximity to water.
• Do not attempt to charge battery packs in the immediate
vicinity of swimming pools, lakes, rivers, oceans, inland
seas, etc. Above all,
NEVER ATTEMPT TO OPERATE A
CHARGER IF YOU, THE CHARGER, OR THE BATTERY
PACK ARE WET.
• Always remove the battery pack from the boat
before re-charging.
• This boat is controlled by radio signals, which are
susceptible to possible interference from other R/C
transmitters, paging systems, or other electrical noise.
Before turning your radio transmitter and receiver on,
make sure no one else in the area is operating a radio on
the same frequency (channel).
• Do not touch the propeller anytime the electronics are
turned “ON.”
Pay close attention to items such as loose
clothing, shirt sleeves, ties, scarves, long hair or any
loose objects that may come in contact with the spinning
propeller. If your fingers, hands, etc. come in contact
with the spinning propeller, you may be severely injured.
• The speed and mass of this boat can inflict property
damage and severe personal injury if a collision occurs.
Never run this boat in the presence of swimmers or where
the possibility of collision with people or property exists.
• Electric motors can generate considerable heat. Do not
touch any part of your motor until it has cooled.
Touching the motor immediately after running the boat
may result in a serious burn.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the
place of purchase.
Repair service is available anytime.
After the 90-day warranty, you can still have your boat
repaired for a small charge by the experts at AquaCraft’s
authorized repair facility,
Hobby Services , at the address
listed on the front page of this manual.
To speed up the repair process, please follow the
instructions below.
1. Under all circumstances return the ENTIRE system; boat
and radio.
2. Make sure the electronics are turned off and all batteries
are removed.
3. Send written instructions which include a list of all items
returned, a
THOROUGH explanation of the problem,
the service needed and your phone number during the
day. If you expect the repair to be covered under
warranty, be sure to include a proof-of-purchase date
(your store receipt or purchase invoice).
4. Also be sure to send your full return address.
All pictures, descriptions, and specifications found in this
instruction manual are subject to change without notice.
AquaCraft maintains no responsibility for inadvertent errors in
this manual.
SPECIFICATION & DESCRIPTION CHANGES
REPAIR SERVICE
SAFETY PRECAUTIONS
INTRODUCTION
TABLE OF CONTENTS
2